Thursday, January 23, 2020

How to make a 2.0 speaker using PVC pipe

This is a simple speaker that can be made by anyone easily without much effort.
The speaker I showed here is not equipped with the amplifier.

Video

You can watch the video for the making & also for the testing result of this
speaker

Things & Components you need

  • Two PVC pipes with a length of at least 15cm & also diameter which 
  • fits your speaker
  • 2 * Speakers
  • 2 * RCA Cable

Making

First solder two wires to the speaker & then connect the RCA cable to the
speaker or directly connect the RCA cable to the speaker & insulate the
exposed part








Now glue the speaker to the PCV pipe with hot glue & leave it to settle for
about 20 to 30 minutes






Now cover the backside with a cover plate which has a small hole in it for better
sound. You can try with different diameters of holes until it matches your
expectations. Once you decided the size of the hole you want on your cover plate,
glue the cover & leave to dry for about 20 to 30 minutes.






Once everything is done, paint the speaker with the spray paint with the color you
want






Now cover the exposed speaker side with a piece of cloth for the protection of
speaker from dust






Once everything is done connect the speaker to an amplifier & enjoy the
music with your own custom made DIY speaker





Thank you for reading !!!



No comments:

Post a Comment

Hi, Thanks for Commenting !!!