How to make a custom 3.5mm Stereo Audio to Crocodile clip cable

Making of 3.5mm audio to crocodile clip cable is very simple & very useful. This

cable will come in handy when you're testing an amplifier on a breadboard.

Video

You can also watch the video on how to make a 3.5mm Stereo Audio to Crocodile 

clip cable

Things & Components you need

• 3 * Wires (different colors)
• 3 * Crocodile Clips
• 2 * Small Heat Sink Tube
• 1 * 3.5mm Audio Stereo Jack

Making

First, remove the protective cover of the wire on the edges to expose the bare 

wire.

Now put a temporary insulation tape & then twist the wires

Now connect the wires to the 3.5mm Audio Stereo Jack

Once the audio stereo jack is connected remove the insulation tape & secure the 

wires with the heat sink tube at both ends & enclose the 3.5mm jack with its 

outer cover

Now connect the crocodile clip to the other side of the wire

Once everything is done connect it to you breadboard & enjoy testing you 

amplifier circuits

Pin Diagram

Thank you for reading !!!